Robotic Contour Beveling

AT&F’s advanced robotic welding contour beveling system can cut multiple bevel profiles, straight or shaped, in a single operation. The programmable robotic torch and laser-guided camera system allow extensive geometries to be cut, including X, Y, B, and K bevel profiles from 0 to 60 degrees. At cutting speeds up to 30 inches per minute, tolerances of +/- ½ degree and +/- 1/32” are possible.

Non-ferrous metals up to three inches thick can be cut; the machine is able to be configured for plasma or oxy-fuel use. The contour beveling robot provides weld-ready bevels, removing the need for machining or grinding, saving our customers time and money.